Power Button Rear View Mirror Jeep

Your early morning drive is suddenly interrupted by a disturbing vibration in the rear view mirror of your Jeep. You instinctively reach out to steady it but then, you notice for the first time, a small power button at the base of the rear view mirror. You’ve been driving this vehicle for months, perhaps even years, and you’ve never once wondered what this button does. So the question arises, “what is this ‘power button’ on my rear view mirror of my Jeep for?” Let’s delve in.

What is worth noting first is that the power button on your Jeep’s rear view mirror isn’t just there for aesthetic reasons. This button can extract a great deal of functionality from your Jeep’s rear view mirror. Depending on your Jeep model, this button might activate the auto-dimming function, a built-in compass, or even turn on/off internal and external lights. If there’s anything you should take from this, it’s that the seemingly inconsequential power button on your rear view mirror is actually a very handy tool.

Understanding Your Jeep’s Rear View Mirror Power Button

To use the power button correctly and benefit from its features, it’s important to understand what it’s meant to do. In many modern Jeep models, the rear view mirror power button controls the auto-dimming function. Auto-dimming mirrors are designed to automatically darken to reduce glare from headlights of vehicles behind you. Let’s break this down.

Auto-Dimming Function

Auto-dimming mirrors work via a process called electrochromism. The mirror contains two layers of glass which have electrochromic gel in between. When the sensor on the mirror detects light from trailing vehicles, it triggers a low voltage current that darkens the gel, reducing the reflection and glare.

To activate the auto-dimming function, press the power button on the rear view mirror. Use the following steps:

1. Start your Jeep and let it run for a few seconds.
2. Press the power button on your mirror.
3. Wait for the indicator light to show that the auto-dimming feature is on.
4. Adjust the mirror to your preferred position if needed.
5. Test the auto-dimming function by shining a high-beam torch onto the mirror sensor.Typically, the mirror should automatically dim within seconds.

Remember, the brightness level of the auto-dimming function can typically be adjusted in the settings of your Jeep’s infotainment system. Always refer to your vehicle’s manual for detailed instructions.

It’s also worth noting that some Jeep models come equipped with a compass or temperature display, or controls for internal and external lights in the rear view mirror.

A Guide to Troubleshooting Your Jeep’s Rear View Mirror Power Button

All vehicle parts and features are subject to potential problems or malfunctions, and the power button on your Jeep’s rear view mirror is not different. Here are some common issues that may arise with the power button and how they can be resolved.

The Auto-Dimming Function isn’t Working

If you’ve pressed the power button to activate the auto-dimming feature and it’s not working, try the following:

– Double-check to make sure the rear view mirror is properly positioned.
– Ensure there’s no blockage covering the light sensors.
– Check if the mirror’s cable connector is properly connected.
– Consult your vehicle’s user manual or contact your dealership for further assistance.

The Power Button is Stuck

If the power button is stuck or resistant to touch, try the following steps:

– Remove any visible debris around the button using a can of compressed air.
– Consult your vehicle’s user manual or contact your dealership for guidance.

Frequently Asked Questions

Q. What should I do if my rear view mirror is vibrating excessively?

Excessive mirror vibration can make the rear view indistinct and affect your driving. In case of a vibrating mirror, check to see if it’s securely attached. If it’s not, have it professionally re-installed. If the mirror is still vibrating excessively after being secured, it could be due to a larger problem with the vehicle. In this case, it’s best to contact your dealer or a professional mechanic.

Final Thoughts

In conclusion, the little power button on the rear view mirror of your Jeep serves as more than just a decoration. Its primary function is to activate the auto-dimming feature of your mirror, reducing the glare that can interfere with your sight while driving at night. However, it’s worth noting that depending on the model of your Jeep, this button may offer additional features. Always refer to your vehicle’s user manual to understand the full functionality of the power button.